Replaces Clicker KLIK1U 375UT 375LM, 2-Button Universal Garage Door Remote, LiftMaster Chamberlain Craftsman Genie & More
Replaces Clicker KLIK1U 375UT 375LM, 2-Button Universal Garage Door Remote, LiftMaster Chamberlain Craftsman Genie & More
Exclusive Discounts: Up to 8% OFF
- Buy 1 Item → Get 2% OFF
- Buy 2 Items → Get 5% OFF
- Buy 3+ Items → Get 8% OFF
- Notice: All products, any combination, auto applied at checkout.
2-Button Universal Remote for LiftMaster, Chamberlain, Genie, Linear
A two-button universal remote that replaces the Clicker KLIK1U, 375UT and 375LM. Each button programs independently, so one remote can run two garage doors, two gates, or a door and a gate — even when they are different brands. Range is up to 120 ft.
It covers openers that program with a learn button and fixed-code openers with 7 to 12 dip switches, across systems built from 1976 to today.
Before You Buy: Learn Button or 7–12 Dip Switch
Two things decide whether this remote works: the programming type on your opener, and the number of dip switch positions. Find the learn button or dip switch on the motor unit or on an external receiver.
| Check | What to look for |
|---|---|
| Programming type | A smart / learn button, or a dip switch on the opener or receiver |
| Dip switch count | 7, 8, 9, 10 or 12 positions — all are covered |
| Learn button colour | Orange/Red, Purple, Green or Yellow |
Not compatible with:
- Allstar, Marantec or Hormann openers
- LiftMaster MyQ systems
18 Systems, Selected by Press Count
The remote is not set with a switch — it is set by how many times you press a button. Count the presses that match your opener, then use that number in the programming steps below.
| Press count | Brand | Learn button / dip switch | Year range | Frequency |
|---|---|---|---|---|
| 1 | Linear | Mega-Code | 1997–current | 318 MHz |
| 2 | Chamberlain / LiftMaster / Craftsman | Orange or Red button | 1997–2005 | 390 MHz |
| 3 | Chamberlain / LiftMaster / Craftsman | Purple button | 2005–2014 | 315 MHz |
| 4 | Chamberlain / LiftMaster / Craftsman | Green button | 1993–1996 | 390 MHz |
| 5 | Genie / Overhead Door | Intellicode | 1995–current | 315 MHz |
| 6 | Genie / Overhead Door | Intellicode | 1995–current | 390 MHz |
| 7 | Stanley | Secure Code | 1998–current | 310 MHz |
| 8 | Chamberlain / LiftMaster / Craftsman | Yellow button | 2011–current | 310 / 315 / 390 MHz |
| 9 | Wayne Dalton | Rolling Code | 1999–current | 372.5 MHz |
| 10 | Chamberlain / LiftMaster / Craftsman | 9 dip switch | 1990–1992 | 390 MHz |
| 11 | Chamberlain / LiftMaster / Craftsman | 9 dip switch | 1983–1989 | 315 MHz |
| 12 | Genie | 12 dip switch | 1985 | 390 MHz |
| 13 | Linear Multi-Code | 10 dip switch | 1976–current | 300 MHz |
| 14 | Chamberlain / LiftMaster / Craftsman | 8 dip switch | 1983–1989 | 390 MHz |
| 15 | Stanley Multi-Code | 10 dip switch | 1976–current | 310 MHz |
| 16 | Genie / Overhead Door | 9 dip switch | 1985–current | 390 MHz |
| 17 | Linear Moor-O-Matic | 8 dip switch | 1976–current | 310 MHz |
| 18 | Chamberlain / LiftMaster / Craftsman | 7 dip switch | 1983–1989 | 390 MHz |
Access Master, Do-It, Master Mechanic, Raynor and True Value follow the same compatibility as Chamberlain, LiftMaster and Craftsman.
How to Program the Remote
A. Openers with a smart / learn button
- Start with the door or gate closed.
- Slide the battery cover down to open the remote, then press and hold the program button until the LED comes on.
- Press and release the smart / learn button on the opener motor unit.
- Select the button you want to program and press it the number of times shown in the table above, letting the LED stop flashing after each press. The code is accepted when you hear a click, the door moves, or the opener light flashes.
- Press the program button to exit programming mode, then press the selected button to test.
B. Openers with a dip switch
- Start with the door or gate closed.
- Slide the battery cover down to open the remote.
- Set the remote’s dip switches to match the opener or the existing remote exactly, and turn any extra switches off.
- Press and hold the program button until the LED comes on; select a button; press it the number of times shown in the table. Code is accepted when the door activates.
- Press the program button to exit, then test.
Two notes on dip switches. On a two-position switch, if programming fails, reverse every switch (off to on, on to off). On a three-position switch, do not use the “0” position — use “+” or “−”. If your original remote had three buttons, switch 1 must be set to “−”.
If a button will not program, try the other button instead. If the unit still does not respond, return to step 4 and repeat.
Replaces Clicker KLIK1U, 375UT and 375LM
| Old remote | Note |
|---|---|
| KLIK1U | Chamberlain Clicker universal remote |
| 375UT | Chamberlain Clicker universal remote |
| 375LM | Chamberlain Clicker universal remote |
The body shape and button layout follow the Clicker universal, so a visor clip and keychain loop work the same way as on the original.
Specifications and What’s in the Box
| Specification | Detail |
|---|---|
| Buttons | 2 — each programs independently |
| Doors or gates | Up to 2, including mixed brands |
| Programming | Smart / learn button, or 7–12 position dip switch |
| Systems covered | 18, selected by press count |
| Frequency | 300 to 390 MHz depending on system |
| Year range | 1976 to current |
| Range | Up to 120 ft |
| Battery | CR2032 coin cell |
| Type | Aftermarket replacement remote |
1 PCS
| Item | Quantity |
|---|---|
| Remote | 1 |
| Visor clip | 1 |
| CR2032 battery | 1 |
| Programming instructions | 1 |
2 PCS
| Item | Quantity |
|---|---|
| Remote | 2 |
| Visor clip | 2 |
| CR2032 battery | 2 |
| Programming instructions | 1 |
Frequently Asked Questions
How many doors can one remote control?
Two. Each button programs separately, and the two doors can be different brands.
Does it work with my dip switch opener?
If the opener or receiver has 7, 8, 9, 10 or 12 dip switch positions, yes. The count and year range are in the table above.
Is it compatible with LiftMaster MyQ?
No. MyQ systems are not supported by this remote.
What if my opener is older than 1993?
Several of the 18 systems go back further — Linear Multi-Code, Stanley Multi-Code and Linear Moor-O-Matic are listed from 1976, and the 8 and 9 dip switch Chamberlain systems from 1983. Check the table before assuming it will not fit.
What battery does it take?
A CR2032 coin cell.
What is the difference between the 1 PCS and 2 PCS option?
One remote or two. The 2 PCS option adds a second remote, a second visor clip and a second battery; the instructions are shared.
One button will not program — what now?
Try programming the other button instead. If that also fails, go back to step 4 and repeat the press count, checking that the LED stops flashing after every press.